For new batteries or batteries that have been stored for a long time (> three months), it is effectual to make only one charge/discharge cycle.The battery must be charged prior to using it for the first time because it is delivered with an energy content as low as possible.Noisy to be used in the position solution.ĭisplays the real-time device configured to be used and itsĭisplays the current position mode depending on the config.

Tions to these satellites are considered to be too This may be eitherīecause satellites cannot be viewed or the observa. The number of contributing satellites can differ from The configured cut off angle according to the current almanac.ĭisplays the number of satellites on L1 and L2 that areĬontributing to the currently computed position solution. Icon becomes visible the receiver is in a stage where practicalĭisplays the number of theoretically visible satellites above

By connecting the CompactFlash card directly to the computer either via an internal card slot housing or an external OMNI drive, the software is transferred to the card, which is then stored to the System RAM.ĭisplays the status of the current position.

Using LGO the software is transferred via the serial interface to the CompactFlash card in the receiver, which is then stored to the System RAM.

The software can be uploaded onto the receiver using the following methods: Software upload All instrument software is stored in the System RAM of the receiver. This software covers display, soundĪnd communication settings of the RX1210 and RX1220T. Information on the GeoC++ development environment is avail-Īble on request from a Leica Geosystems representative.įor RX1210 and RX1220T. Purchased and are only activated with a licence key.Ĭustom software specific to user requirements can be developed Some of these programs are freely available and can be loadedĪnd are immediately activated.

8.1.1 Tracking Characteristics of the ReceiverĪ suite of optional survey-specific application programs are.

7.5 International Warranty, Software Licence Agreement.

5.3 Getting Started with the GRX1200 Series.

4.7 Operation with a Typical Configuration Set.4.5 Accessing Survey Application Program.2.2.2 Data Storage and Data Conversion Concept.

Leica geo office 7.1 stopped working